The ama finally finished ready for polishing and me
Bottom of main hull
Finishing the beam for polishing
beam end flange added
Ama final sanding 400 - 600 grit
3 - 95lb rolls of 3/4oz mat
Ama polished ready for gel coat and tool build
PVA finished 11 coats
Gel coat 18 mils thick
Gel coat finished curing
First layer of 10, 3/4 oz mat
Layer 5
Close up of the finished tool
10 layers of 3/4 oz 4mm - 5mm thick, 1-3 fabric to resin ratio by weight
Beam end flange
No comments:
Post a Comment